M4A1 MWS

TMgbbr-001

New

Tokyo Marui

RAS equipped with a (rail adapter system), scalable made to correspond to a variety of optional parts is "M4A1 MWS", finally appeared in the gas blow back! 

More details

5 Items

¥51,667 / ¥51,667

Gun Length 777 mm / 854 mm (when the stock is fully extended)
Inner Barrel Length 250mm
Power Source HFC134A Gas
Number of Bullets 35 + 1 shot
Gun Weight 3,740g

RAS equipped with a (rail adapter system), scalable made to correspond to a variety of optional parts is "M4A1 MWS", finally appeared in the gas blow back! 
Dedicated blowback engine in the series up to 50% diameter 19mm Including the cylinder of, an unprecedented recoil shock occurred. Equipped with a new mechanism for improving durability including the Z - system, pursuit of realism of shape reproduction and texture, and ultimate gas blow back which combines the high accuracy of the hit accuracy & operation like Tokyo Marui It is a model. 

● Realize intense blowback: Equipped with a new blowback engine adopting a large piston with a diameter of about 19 mm. The bolt also works in conjunction with launch, and you can enjoy unprecedented recoil shock. 

● High durability: New mechanism to prevent wear and breakage of bolt catch Z - System, piston · absorber, friction · relief · bolt roller to reduce the burden on internal parts by bolt operation, prevent looseness due to recoil The barrel clamping mechanism that always brings out the center of barrel, etc. has improved the durability against intense recoil shock. 

Realistic movable gimmick: Faithfully reproduce the same function as genuine, including initial loading by charging handle operation, bolt catch operation after bolt opening and magazine change, Enhanced stock which can adjust the length to 6 levels It is. In addition, field stripping (ordinary disassembly for maintenance) can be done in a form close to genuine. 

Equipped with metal RAS: Hand guard Equipped with RAS (rail adapter system) with mount rails on 4 noodles on the top and bottom, left and right. Various optional parts corresponding to Picatinny standard (20 mm width) such as flash light and fore grip can be installed. Also, the heat shield inside the RAS is reproduced. 

● Millspec paint Seracoat: Adopted a seracoat with a strong coating film and excellent scratch resistance for upper / lower frames and bolts. You can also enjoy the texture as genuine. 

Adjustable front / rear site: Adjustable top and bottom of the front site can be adjusted with the included adjustment tool. In addition, you can fine-tune the rear site by up and down, left and right dial control respectively. 

● Corresponding to various muzzle options: If you remove the compensator of the muzzle, you can install a muzzle option with a 14 mm reverse screw specification such as a silencer. 

● Aluminum Die Cast Magazine: 35 magazines, aluminum die-cast magazine reproduces the "real magazine weight loaded full of bullets". 

4 other products